Original Coban Accessories 433MHz Remote control for GPS103B/B+,
TK103B,GPS303D/G,TK303D/G, GPS303I,TK303I, GPS105B,TK105B etc
433MHz Remote control for GPS103B,TK103B,
GPS103B+,TK103B+,
GPS303D/G,TK303D/G,GPS303I, TK303I
GPS105B,TK105B
New type remote control from factory directly
Each gps tracker support 2pcs remote control ONLY
Customers can buy 2pcs remote controller to monitor your gps tracker at the same time.
Before your buy,please really check this remote control is the same with your side one.
Note
If you lost your remote controller, you can consider to buy this one, and please make sure your ones is the
same with our pictures show you.
If customers don't know how to use the remote control,please contact us via ebay message to get the study
user guide.
We do have 433Mhz type. it can check clear on the remote, open the rear cover.
Kindly check the guide for the remote:
If you have one remote work with your on hand tracker, need add another one, follow below steps,
if you do not have the siren, ignore the siren part.
1. To program 2 remote control of the GPS device, turn on the GPS and press the SOS (on the harness)
for 7 times continuously (it is for the red button on the harness, 7 times continue press need 4 seconds around)
and siren beeps 2 times to enter learning mode, press button(lock) of the first remote control(the original one.),
the siren will beep 1 times, then press the button(unlock) of the second remote control(the new one), siren beeps
2 times means programming complete successfully, you can turn off the device after 5 seconds.
Ps: The first remote means your on hand one have the BXXX number on the back one, the second remote means
no mark label on it one.
If you do not have one remote work with your on hand tracker, need add the first one, follow below steps,
if you do not have the siren, ignore the siren part.
2. To program 1 remote control of the GPS device, turn on the GPS and press the SOS (on the harness)for
7 times continuously and siren beeps 2 times to enter learning mode, press button(lock), siren beeps 1 times
then press button (unlock)and siren beeps 2 tims means programing successfully.
you can turn off the device after 5 seconds.
Ps: lock button for the locker close one, the red one,
unlock button for the right side of the lock button, the open locker one.
One tracker on the same time max have 2 pcs remote controllers.
Note
If you need any helps, please kindly let us know, we are always here and willing to help.
Package include:
1 * Remote control (433MHz)
