modname=ckeditor
Package List:1 x bluetooth module1 x bluetooth microphone1 x User Manual
Car Bluetooth 5.0 Kit AUX Hands Free Adapter CD Changer Cable for Toyota 6+6 12 Pin RAV4 Corolla Avensis Auris Camry AVRCP Radio
Features1. Plug and play: Use the original car audio host's disc box interface to install in place, simple and fast, and integrate perfectly with the original car.2. Support HFP Bluetooth hands-free calling: You can control the operation of answering / hanging up the phone through the original car audio host and the steering wheel buttons.3. Support A2DP Bluetooth music player: Bluetooth device audio can be easily played through the original car audio4. Bluetooth AVRCP control technology: You can use the car audio host (or steering wheel) to control song selection / fast forward / rewind / pause, easy and safe control.5. High-fidelity sound quality: The Bluetooth host is output to the car audio through a wired connection, eliminating any interference and sound quality loss, and the sound quality is comparable to CD.Product Description:- Input voltage: 12V DC- supports HiFi, A2DP, AVRCP and HFP- Frequency response: 20Hz to 20kHz, ± 2dB- Frequency Range: 2.402~2.480GHz- Power: ≤ 5W- Distortion: 0.01%- SN Ratio: 95dB- Working temperature: -35C-85C- AC6926A stereo bluetooth chip.- Integreated intelligent voice noise reduction tenology to reduce for echo and noise- Support Button control on radio/steering wheelFit Car CD Radio:Toyota 6+6P connector 4Runner 2003-2010, Avensis 2003-2011(Not fit for W53904), Avalon 2005-2010, Camry 2005-2010, Celica 2003-2010, Corolla 2006-2011, Fortuner 2004-2011 FJ Cruiser 2007-2010, Highlander 2004-2010, Land cruiser 2003-2010, Matrix 2003-2010, MR2 2004-2010, RAV4 2005-2010, Sequoia 2005-2010, Sienna 2004-2010, Solara 2004-2010, Tacoma 2005-2010, Tundra 2004-2010, Venza 2009-2010, Vitz 2006-2010, Yaris 2006-2010Note: NOT compatible with Navigator or DVD XM radio. Installation Guide1. Power off the car, remove the radio2. plug the device into the CDC port ( at the back of radio )3. Connect your Ipod or Iphone by include ipod cable.4. For Bluetooth, plug the included MIC phone into the device and fix the microphone on a good position. then open the BT in your mobile,5. After connecting, turn on your radio and press CD/AUX to switch to the ipod aux adapter, Then you could listen the music from the ipod, Control the music from the audio button by pressing DISC +/-, TRACK +/-6. For BT, when the call is coming the device will switch form IPOD mode to BT mode, Press TRACK +/- to answer or end call, when you hang up the call, it will continue to play the ipod music automatically.Package List:1 x bluetooth module1 x bluetooth microphone1 x User Manual
