Fill out my online form.
for 70mai Parking Surveillance Cable for 70mai 4K A800S Dash Cam WIDE D07 PRO Plus+ A500S Car DVR A400 Hardwire Kit for 24H Parking Monitor in Car
Can be used for:
70mai Dash Dam 4K A800S
70mai Dash Dam Pro Plus+ A500S
70mai Dash Cam Lite D08
70mai Dash Cam A400
70mai Dash Cam Wide Mirro D07
70mai Dash Cam M300
70mai Dash Cam 1S D06 (Not for parking but for power supply)
Specification:
Material: ABS
Output voltage: 5V
Output current: 1A/1.5A/2.5A
Standby power consumption: ≤ 0.01W
Low Voltage Protection: 11.6V
Output interface: Mini usb
Net weight: About 0.12kg
If you are worried about your car being damaged by someone else after parking, you can use our buck line to connect the DVR to ensure that the recorder works 24 hours.If someone else hurts your car and the shock triggers the G-sensor, the DVR will immediately turn on and record the situation.
Buck Line
Use the buck line to not occupy the cigarette lighter interface.
First, connect the negative pole(black line) of the buck line to the ground of the car fuse box;
Secondly, if you want to continue monitoring after parking (the DVR works 24 hours), connect the positive pole(red line) of the buck line to the BAT interface of the car fuse box;
If you want to stop monitoring after parking (the DVR does not work after parking), connect the positive pole of the buck line to the fuse box ACC interface.
How to Hidden The Parking Cable?
1.Connect with Cae ACC power,when start car engine,dvr will turn on automatically,when turn off car engine,dvr will turn off automatically.
2.Connect with Car battery or often electricity,can support 24 hours power for dvr work,sipport car dvr is Parking Monitor function.
Use voltage drop line installation, does not occupy cigarette lighter, cigarette lighter
for mobile phone charging, saving space
Low-voltage protection: This is the protection when the normal power (battery) is connected, that is, when the input voltage is lower than 11.6, the main board will automatically power off and will not continue to consume the battery's power, So as to ensure that the car can normally ignite and start the car.
Step-down function:It can convert the voltage of 12-30V into the output voltage of 5V. The
input voltage of electronic products such as cardriving recorder and GPS are all 5V
How to Hidden The Parking Cable?
1.Connect with Cae ACC power,when start car engine,dvr will turn on automatically,when turn off car engine,dvr will turn off automatically.
2.Connect with Car battery or often electricity,can support 24 hours power for dvr work,sipport car dvr is Parking Monitor function.